Driveway Power Washing
Power washing for your driveway
AF Driveway
Power Washing
Full-service driveway pressure / power washing in American Fork, UT
Call for a free estimate today at 801-877-1793
Our Driveway Power Washing Solutions
Power Washing For Your Driveway
Driveway Power Washing
- Concrete
- Stone
- Brick
- Pavers
- Dirt Removal
- Stain Removal
- Oil Removal
- Grease Removal
The Benefits of Driveway Power Washing
Repairing or replacing a concrete driveway may be quite costly.
Homeowners’ most typical issues with their cement driveways include fractures, exposing joints, missing corners, staining, flaking, discoloration, or sinking. A new driveway may easily cost more than $10,000 and can also cost a few thousand dollars to fix.
We can make your driveway seem new and keep it that way for a longer time with driveway power washing.
We Deal with Driveway Power Washing, So You Don’t Have To!
Is your driveway covered with stains from oil, rust, and tire marks? Just call us, as we’re the best at pressure cleaning driveways. We clean driveways of all sizes in all locations. Biodegradable enzymes and degreasers may be used to remove oil stains from concrete. Car batteries are cleaned of corrosion, and tire marks are removed from parking lots.
It is advised that you wash your driveway at least twice a year to keep it in good condition throughout the year, but working on driveway pressure washing yourself is not possible. Are the oil or rust spots on your driveway causing concern among your neighbors?
Driveway pressure washing hot water and high-pressure steam is the best approach to get rid of all the dirt. Get a free driveway washing estimate by contacting us now! Every year, we clean dozens of driveways, and we’d be delighted to do the same for you.
Professional Driveway Power Washing
How We Use a Pressure Washer to Clean a Driveway
Stains on concrete can degrade the surface of your driveway in addition to being unattractive. Using a pressure washer for exterior cleaning is quick and effective. This manual will explain you how to pressure wash your driveway, whether you hire us to do it or want to do it yourself. It also offers safety advice and details on how to prepare your driveway for pressure washing.
Prepare
Remove any loose debris, such as dirt, stone, and other objects, from the driveway surface. You can brush or use a leaf blower. Verify that the driveway is free of any toys or bicycles. Remove outdoor furniture and potted plants from the area you will be pressure cleaning. You might wish to cover any walls or doors that your driveway touches with a tarp and some painter’s tape. The finish will be safeguarded from mishaps or flying debris by covering walls and doors. Consider covering any in-ground plants that are close to your driveway with a tarp as well. The detergent used in pressure washing can harm plants. A tarp, though, can restrict your plants’ access to air, so don’t keep them covered for too long. Spend a few seconds figuring out which end of your drive is tallest and which way water goes across the surface. To ensure that the water follows gravity, you should begin pressure washing at the highest point. It need to move away from where you are working.
Degrease
Concrete stains can be pressure washed out by using a solvent to loosen them up. Some pressure washers come with an attachment tool for degreaser application. In any other case, use a push broom or stiff-bristled brush to scrape the degreaser into the concrete.
Power Wash the Driveway
Work your way down the drive starting at the higher end and going with the flow of the water. 1) Press the trigger while aiming the spray wand at the driveway surface. 2) Overlap each stroke of the nozzle on the concrete by several inches as you sweep it firmly back and forth. 3) After covering the entire surface with detergent, leave it alone for around 15 minutes. To prevent it from drying out, you might need to rewet it every so often.
Rinse
A high-pressure nozzle should be used after 15 minutes. Activate the rinse mode on the pressure washer. Repetition of the previous sweeping motion will help you remove the detergent and remove any dirt or stains you uncover. To remove heavy stains, make tighter sweeps. Make sure to rinse off the detergent completely. The driveway should then air dry.
Optionally Seal the Concrete
Apply a sealer to the concrete once it has fully cured to help prevent further stains. Apply a concrete sealant to the driveway’s surface using a roller with an extension pole. Prior to using the driveway, give the surface a full day to settle.
You can enhance your driveway’s appearance and even raise the curb appeal of your entire house once you know how to pressure wash it. However, you should proceed with caution when pressure washing and call out American Fork Power Washing pros if you need help.